Always perform a preliminary test beforehand.
Restoration :
- Use the product neat.
- Dampen the base thoroughly.
- Spray the product in a uniform manner with the aid of a sprayer. The spray produced allows control of proper application.
- Leave to act for 15 minutes, then apply again before leaving to act for around 40 minutes. The action time varies depending on the depth of the clusters and the ambient temperature, heat accelerates the process.
- In case of significant concreate clusters, brush the base to be treated with a hard brush, the mechanical action will allow the elimination of more residue.
- Thoroughly rinse at high pressure before the product dries. Otherwise, reapply the product and leave to act for 10 minutes.
- In case of stubborn residues, repeat the operation.
Regular maintenance :
- Dilute the product to the ratio of 1L for 1L of water. Do not mix with other products.
- Follow the same procedure as with restoration.
Small equipment:
- Dilute the product to the ratio of 1L for 1L of water. Do not mix with other products.
- Leave the equipment soaking overnight.
- Brush and rinse thoroughly.