- Shake the aerosol.
- Apply by directly spraying 20 cm from the surface of the graffiti or on a cloth for an application by wiping, particularly for the case of porous surfaces.
- Generously soak the graffiti to eliminate it with the product.
- Watch the action on the graffiti, repeat the operation if necessary, then finish by rinsing with clean water or possibly thoroughly wiping with a damp cloth.
- In the case of deep incrustation on porous bases, repeat the application, depending on the case, leave to act for a several minutes to a few hours.
- Then thoroughly rinse the base with water in order to neutralise the action of Alginet graffiti.
ALGINET GRAFFITI
Cleaner effective against graffiti – smooth surfaces and bases specific
Bases :
All facade materials: natural or reconstituted stone, bricks, rendering, sealants, concreate, cement, painted facades, smooth surfaces.
Does not change the appearance or structure of materials.
Remove graffiti from smooth surface and porous bases.
-
woo_modedemploi_tab_content
-
Instructions for Use
woo_recommendation_tab_content -
Recommendations
woo_composition_tab_content -
Composition
On materials generally sensitive to solvent cleaners, perform a preliminary test by application with a cloth on a limited area in order to see the compatibility of the base with the product and to determine the contact time required to clean the base whilst limiting its alteration.
Protect the surrounding vegetation.