Algidecap +

ALGIDECAP +

Paint stripper

Bases :

Paint, rendering or coatings, RPE, lacquers, varnishes

Does not run: gel formula, without petroleum solvent, high ignition temperature, does not dry, biodegradable.

Conditioning: 5KG Consumption: 1 kg for 2 to 4m² depending on the nature and thickness of the layers of paint to eliminate

Apply a generous layer of stripper on the bases to be treated with the aid of a brush, a roller or a paintbrush, (the product can also be sprayed with the low pressure AIRLESS equipment).
For facade coatings, (paint, acrylic, vinyl, styrene acrylic, lacquer on woodwork or metalwork): apply around 250 g/m², leave to act for around 15 to 30 minutes before removing the coating.
For thickly coated plastic rendering or coatings: apply around 500g/m², leave to act for 90 to 180 minutes before removing the coating. Perform a test on a small area to confirm the action time.
Remove the coating disintegrated by the stripper, either with a knife or a spatula followed by rinsing with water, or with the aid of a high pressure washer, (120 bars).
If required, apply a second layer of stripper.
Clean the tools with water after use.

Protect sensitive materials from the stripper: PVC, plexiglass, polycarbonate, some rubber and silicone seals.

Technical specification: Appearance: clourless gel.

Density: 1.1 +/- 0.05.

Ignition point: 110°C. PH : 6