Dampen the base.
Dilute the product to the rate of 1 litre to 14 to 19 litres of water.
In the case of heavily incrusted grease or oil stains, dilute the product to the rate of 1 litre to 1 to 4 litres of water.
Spray the mixture on the base.
Leave to act for 45 to 60 minutes.
Rinse with a high-pressure cleaner, or a brush and a jet of water and possibly hot water.
Clean the tools with water after use.
Important : do not apply the product neat on paintwork, glass, aluminium, metallic surfaces, wood, marble and surrounding vegetation, even if diluted
EXTERIOR PAVING AND FLOOR CLEANER
Permanently eliminates stains and restores a clean appearance
Bases :
Exterior paving and floors: self-locking slabs, natural and reconstituted stone, unrefined and tinted concreates, washed gravel, terracotta, terracotta tiles, etc.
-
woo_modedemploi_tab_content
-
Instructions for Use
woo_recommendation_tab_content -
Recommendations
woo_composition_tab_content -
Composition
Domestic storage without freezing.
C (Corrosive) - contains disodium metasilicate.
R34 : causes burns.
S1 : keep locked up.
S2 : keep out of the reach of children.
S26 : in case of contact with the eyes, wash immediately and extensively with water and consult a specialist.
S36/37/39 : wear appropriate protective clothing, gloves and a protective device for the eyes / face.
S45 : in case of an accident or discomfort, immediately consult a doctor, (if possible show them the label)